TGSI-supplier

 

Tactile indicators australia, northern territory, western australia, queensland, tasmania

stair-nosing-supplier-brisbane-perth-sydney

DISCRETE TACTILE GROUND SURFACE INDICATOR RANGE:

ENDURA:

Dimensions: 35mm diameter X 4.5mm height

Metal types: Solid marine grade 316L grade stainless steel. One piece forged construction. 10 year Guarantee.

Finish: Machine

Type: Hazard

Location: Indoor and outdoor

Suitable substrates: Hard surfaces: Concrete, bitumen, ceramics, stones, woods, plastics, steel, vinyl, rubber, glass.

Underside: 11mm long X 6mm wide stem, 25mm long X 8mm wide stem, 4mm long stem, custom size stem, or flat underside (direct epoxy fix). Item does not have empty underside like some cheaper alternatives on the market.

Slip resistance rating: R13, W (P4). CSIRO test report available on request.

Luminous reflectance values (mean): 19.52 (dry), 17.69 (wet)

Notes: Proven quality, premium grade, highly durable tactile indicator suitable for both interior and exterior environments. Quality will equal or exceed any 316 grade stainless steel TGSI on the market. 10 year guarantee.

 

Available for purchase via our tactile ground surface indicators Online Store. Enter Online Store.

 

11mm long X 6mm wide stem (recommended for installation direct to hard solid material, eg. concrete, tile, stone, woods, hard vinyl etc). Use of single component adhesive/ sealent is generally used to fix this model to ground surface material.

Endura discrete stainless steel tactile ground surface indicator

discrete hazard TGSI supplier

25mm long X 8mm wide stem (recommended for installation direct to bitumen/ asphalt, or fixing to hard substrate located under floor covering material).

long stem TGSI for bitumen asphalt

Flat based stainless steel discrete TGSI, direct epoxy fix to hard flooring material (recommended for fixing to ceramic tiles/ hard stone/ terrazzo in interior locations only). Use high quality epoxy adhesive.

flat-based-epoxy-fix-discrete-hard-tactile-indicator-australia

Discrete warning TGSI

Endura_316_stainless-steel-tactiles-timber-decking

 

MULTI TAC:

Dimensions: 35mm diameter X 5.0mm height

Metal types: Solid 316 grade stainless steel, brass.

Finish: Electro polished, custom.

Location: Indoor, outdoor

Underside: Flat with hole in center (screw in fixation)

Slip resistance rating: R11, P5. CSIRO test report available on request.

Luminous reflectance values (mean): 15.58 (dry), 17.41 (wet).

Screw: Stainless steel, 8 gauge screw supplied with the product (for stainless steel model).

Suitable substrates: Easy installation on wood based substrates (wood, carpet tile/ wood, vinyl/ wood etc.) Drill pilot hole, and fix via driving screw into substrate. Note: Carpet should be hole punched prior to drilling. Mult-Tac screw fix TGSI's can be fixed to hard substrates (eg. concrete, stone etc.) with use of wall/ anchor plug.

Note: Versatile, removability option (re-use etc.). High class finish. Supplied with screw.

Available for purchase via our tactile ground surface indicators Online Store. Enter Online Store.

TGSI Tactile indicator. screw in application

Screw fix stainless steel tactile indicator stud

GRIT-TAC

Dimensions: 35mm diameter X 4.5mm height

Metal types: Solid 316 grade stainless steel with colored grit centre.

Centre infill: Heavy duty/ high durabilty bonded alumiunium oxide/ carborundum grain infill. Black or yellow color.

Finish: Machine

Type: Hazard

Sides: Ribbed, smooth

Location: Outdoor, indoor

Suitable substrates: Hard surfaces: Concrete, ceramics, stones, woods, plastics, steel, vinyl, rubber.

Underside: 11mm long X 6mm wide stem, or flat underside, custom stem (eg. 25mm long).

Slip resistance rating: P5. Test report available on request.

Luminous reflectance values (mean): Yellow infill: 27.33 (dry), 25.33 (wet),

Black infill: 3.79 (dry), 3.39 (wet)

Notes: Hard wearing, high durability, good constrasting options.

Available for purchase via our tactile ground surface indicators (TGSI's) Online Store. Enter Online Store.

GRIT TAC DISCRETE STAINLESS STEEL TACTILE GROUND SURFACE INDICATORS

Stainless steel tactile with yellow insert

Grit tac stainless steel discrete tactile indicator with black carborundum insert

 

ENDURA BL:

Dimensions: 35mm diameter X 4.5mm height

Metal types: Solid marine grade 316 grade stainless steel

Finish: Black surface treated finish.

Type: Hazard

Slip resistance rating: P5. Test report available on request.

Luminous reflectance values (mean): 3.21 (dry), 2.87 (wet)

Location: Suitable for both exterior and interior locations.

Suitable substrates: Hard surfaces: Concrete, ceramics, stones, woods, plastics, steel, vinyl, rubber, glass.

Underside: 11mm long X 6mm wide stem, flat underside, custom stem.

Note: High contrast stainless steel option.

Available for purchase via our discrete tactiles Online Store. Enter Online Store.

Black surface finish 316 stainless steel discrete TGSI's

ENDURA SOLID BRASS:

Dimensions: 35mm diameter X 4.5mm height

Metal type: Solid brass.

Finish: Machine finish

Type: Hazard

Sides: Smooth

Location: Outdoor, indoor

Suitable substrates: Hard surfaces: Concrete, bitumen, ceramics, stones, woods, plastics, steel, rubber.

Underside: 11mm long X 6mm wide stem, flat underside, or custom size.

Slip resistance rating: R13, W

Luminous reflectance values (mean): 33.27 (dry), 26.18 (wet).

Special: $1.00/ pce

Available for purchase via our tactile indicator supplies Online Store. Enter Online Store

brass and stainless TACTILE GROUND SURFACE INDICATOR

CFP Brass discrete hazard tactile ground surface indicators

MULTI TAC MACH:

Dimensions: 35mm diameter X 4.5mm height

Metal types: Solid brass, copper, aluminium, stainless steel, polymer.

Finish: Machine.

Location: Indoor, outdoor

Suitable substrates: Effective on wood based substates (wood, carpet tile/ wood, vinyl/ wood etc.). Removability option.

Underside: Flat with hole in center (screw in fixation), also available with no hole in centre (flat based).

Luminous reflectance values (mean): Brass: 25.81 (dry), 22.70 (wet). Copper: 15.41 (dry), 19.23 (wet)

Notes: Versatile. Good option for certain types of carpets, wood decking, and areas where removability is a desired option. High class finish. Australian Made.

brass and copper screw in tactile stud

DIR ST3 (Heavy duty directional TGSI):

Dimensions: 35mm diameter X 4.8mm height X 288mm long

Metal types: Solid 316 grade stainless steel.

Color: Stainless steel lustre or black surface finish.

Finish: Machine

Type: Directional

Location: Indoor and outdoor

Suitable substrates: Hard surfaces: Concrete, bitumen, ceramics, stones, woods, plastics, steel.

Underside: 3 X 15mm long heavy duty welded stems. Compatible drilling templates available for easy installation.

Slip resistance rating: P5. Test report available on request.

Luminous reflectance values (mean): stainless steel: 48.16 (dry), 48.01 (wet), black finish: 6.26 (dry), 5.78 (wet)

Notes: Manufactured from solid stamping (not inferior casting).

Pricing: from $11.00/ pce

Available for purchase via our tactile indicator supplies Online Store. Enter Online Store

 

316 grade stainless steel discrete directional TGSI strip black stainless steel directional tactile strip line blind visually impaired guidance direction

DIR ST3 stainless steel directrional hazard tactile ground surface indicator strips

DIR SF3:

Dimensions: 35mm diameter X 4.0mm height X 285mm long

Metal types: Solid 316 grade stainless steel

Finish: Machine

Type: Directional

Location: Indoor and outdoor

Suitable substrates: Concrete, bitumen, ceramics, stones, wood.

Underside: Flat

Luminous reflectance values (mean): stainless steel: 19.19 (dry), 17.56 (wet)

Notes: Screw-in application.

316 grade stainless steel discrete directional tactile ground surface indicator

TACTILE INDICATOR CARPET SYSTEM (CARPET WITH UNDERLAY):

Dimensions: 300 X 300mm interconnecting base plates.

Tactile type: Discrete stainless steel or discrete polyurethane (range of colors).

Location: Indoor, Carpet with underlay applications.

Underside of base plate: Flat

Method: Fits in between ground surface and carpet layer. Fixation of discrete TGSI's to base plate: Discrete hazard stainless steel, and polyurethane TGSI's are fixed to base plate protrusions via pressure fit method (adhesive not required).

Installation: Enable carpet and underlay to be liftable in order to install TGSI carpet system. Determine area were TGSI's are to be installed. Mark out area on carpet were projections will be located. Using a 13mm diameter hole punch, punch out holes in marked locations. Cut out and remove existing underlay were base plates are to be installed. Adhesive fix base plate to ground surface (this step will aid in noise dampening), and protude projections through the carpet layer. Pressure TGSI studs into base plate projections. Apply weight to entire area and allow adhesive applied to bottom of base plate to set.

Sizes: Various base plate thickness and protrusion heights to cater for different underlay and carpet thickness. The top of base plate projections should fit level with top of carpet pile, or just below (depending on density of carpet).

Base plate type options: 1BP 3.0mm height, 2BP (suits 6-8mm thick underlay), 3BP (suits 8-12mm thick underlay).

Base plate protrusion options (from top of base plate): low 8.5mm (suits carpet thickness 7-13mm), medium (suits carpet thickness 14-18mm), high (suits carpet thickness 19-22mm).

 

Note: Stops tactile indicator sinking into carpet top surface. Reliable, very effective solution for carpet with underlay applications.

Carpet tactile system

tactile indicator carpet system

GRIT-TAC BR

Dimensions: 35mm diameter X 4.5mm height

Metal types: DZR brass, with black grit centre.

Centre infill: Heavy duty/ high durabilty bonded carborundum grain infill. Black color.

Finish: Machine

Type: Hazard

Sides: Ribbed, smooth

Location: Outdoor, indoor

Suitable substrates: Hard surfaces: Concrete, ceramics, stones, woods, plastics, steel, vinyl, rubber.

Underside: 11mm-12mm stem, or flat underside

Luminous reflectance values (mean): Black centre: 4.46 (dry), 4.20 (wet)

solid brass tactile stud TGSI discrete Australian standard office fitout

 

PRESSURE FIT FIXING PLUG STEM TACTILE INDICATORS

Dimensions: 35mm diameter X 4.5mm height

Metal types: Solid 316 grade stainless steel, solid brass.

Top face type: Solid metal with concentric rings, or also available with yellow or black bonded grit centres also (eg. similar to Grit-Tac above).

Finish: Electro Polished

Type: Hazard

Sides: Smooth

Location: Outdoor, indoor

Suitable substrates: Concrete, bitumen, stones, vinyl/ concrete, carpet tile/ concrete.

Underside: Stem with fixing plug, 12mm long or 20mm long models available.

Slip resistance rating: R13

Notes: Non adhesive fixation, pressure fits into 8mm diameter hole.

Available for purchase via our tactile indicator supplies Online Store. Enter Online Store

 

12mm long pressure fit fixing stem

Stainless steel tactile indicator stud with fixing plug stem, no adhesive required

20mm long pressure fit fixing stem.

pressure-fit-tactile-indicators-australiag-

MACHINE FINISH SCREW FIX TGSI:

Dimensions: 35mm diameter X 5.0mm height

Metal types: Solid 316 grade stainless steel

Finish: Machine Finish.

Location: Indoor, outdoor

Suitable substrates: Effective on wood based substates (wood, carpet/ wood, vinyl/ wood etc.). Removability option.

Underside: Flat with hole in center (screw in fixation)

Notes: Versatile. Good option for certain types of carpets, wood decking, and areas where removability is a desired option. Supplied with screw.

screw fix machine finish stainless steel individual tactile studs for wood decking

ENDURA INTEGRATED TGSI PLATE:

Dimensions: 300 X 600mm X 6.5mm (1.8mm base), Custom sizes available.

Material: 316L Stainless steel. DZR Brass, black surface finish, custom

Colors: Stainless steel lustre, brass lustre, custom inserts (eg. Grit-Tac) and base plate type.

Type: Hazard, directional.

Location: Indoor, outdoor

Suitable substrates: Concrete, asphalt, ceramics, stones, woods, carpet, plastics, steel, aluminium.

Installation: Install direct on existing substrate.

Slip resistance rating: R13, V

Luminous reflectance value (mean): Stainless steel: 23.53 (dry), 21.71 (wet), Black finish: 4.05 (dry), 3.45 (wet), Brass: 33.21 (dry), 26.32 (wet).

Notes: Solid 316 grade stainless steel, very durable, high class finish, quick installation. Install via direct adhesion, screw fix or combination of both.

Stainless steel integrated tactile ground surface indicator plate 300mm X 600mm, brass, stainless steel, black

black stainless steel tactile plate grating carpet tileEndura 316 stainless steel integrated warning TGSI plate 300mm X 600mm

integrated tactile plate

QUICK FIX STAINLESS STEEL INTEGRATED TGSI's (Mechanical fix):

Dimensions: 300mm X 300mm X 6.2mm (1.6mm base, 4.6mm high tactile projections).

Material: Solid 316L stainless steel (one piece construction)

Colors: Stainless steel lustre, black surface finish.

Type: Hazard, directional.

Location: Indoor, outdoor

Slip resistance rating: P4

Luminous reflectance values (mean): stainless steel lustre model: 47.47. Black surface finish model: 6.30

Suitable substrates: Concrete, asphalt, ceramics, stones, woods, carpet, plastics, steel, aluminium.

Installation: Install direct on existing substrate.

Notes: Useful for mechanical fix only applications. Durable and economical solution.

Stainless steel integrated tactile ground surface indicator plate 300mm X 600mm, brass, stainless steel, black

 

HOME PAGE

DISCRETE TACTILE INDICATORS

INTEGRATED TACTILE INDICATORS

STAIR NOSING PRODUCTS

SKATEBOARD DETERRENTS

ANTI SLIP / NON SLIP TAPES

REFLECTIVE TAPES

PVC EMBOSSED TAPE (NON ABRASIVE)

DOUBLE SIDED TAPES

ENTRANCE MAT SYSTEMS

ALUMINIUM SKIRTING BOARD

GRP FLOOR GRATINGS

INSTALLATION IMAGES

ONLINE STORE

ONLINE STORE TERMS & CONDITIONS

CONTACT US/ DELIVERY ENQUIRIES

TGSI PTY LTD

ABN: 15 121 583 257

COPYRIGHT © 2019