TGSI-supplier

 

Tactile indicators australia, northern territory, western australia, queensland, tasmania

stair-nosing-supplier-brisbane-perth-sydney

Supply of hazard and directional integrated ground surface tactile indicators. All integrated TGSI products comply with Australian Standard 1428.4.1:2009, Building code of Australia, and DDA requirements. Products in our integrated range are designed for lasting durabilty and aesthetic appeal. Australia wide service and delivery. Slip resistance results are obtained in accordance with AS 4586:2013 (slip resistance classification of new pedestrian surface materials). LRV and slip resistance test reports available on request.

INTEGRATED TACTILE GROUND SURFACE INDICATOR RANGE, Tactile Tiles, Tactile PAds, TACTILE PLATES, TACTile pavers:

PREMIUM GRADE POLYURETHANE, PRE- APPLIED ADHESIVE BACKING:

Dimensions: 300 X 300mm X 6.5mm (1.8mm base).

Material: Highest grade polyurethane available on the market for foot traffic application (BASF Elastollan TPU). UV stabilised, color fast. Material is highly abrasive resistant. Solid tile with no cavities.

Adhesive type: Pre- applied premium grade butyl rubber adhesive backing (highest quality available on market), 1mm thick (for superior adhesion on all surfaces). siliconised release paper.

Primer: Available if required.

Colors: Black, cream, mid/ light grey, orange/ terracotta, safety yellow, blue, custom made to order.

Type: Hazard and directional

Location: Exterior and interior

Suitable substrates: Concrete, asphalt, ceramics, stones, woods, carpet tile, plastics, glass, steel.

Installation: Install direct on existing substrate.

Slip resistance rating: R12, X

Luminous reflectance values (mean): Yellow: 41.0 (dry), 41.0 (wet), Black: 1.89 (dry), 2.09 (wet), Mid/ light Grey: 21.97 (dry), 22.41 (wet), Orange/ terracotta: 21.77 (dry), 20.92 (wet), Cream: 71.18 (dry), 71.12(wet), Blue: 9.38 (dry), 9.07 (wet).

Flame resistance (TPU material): Rated UL-94 HB in vertical flame test for wall thicknesses of 0.75 and 3.0 mm.

Notes: Australian Made and designed to withstand the harsh Australian conditions, quick/ cost effective installation, outstanding resistance to tear propagation, fungus resistant. 10 year material guarantee. Manufactured according to AS/NZS ISO 9001:2000 standard. PU material conforms to the FDA food contact regulations as described in book 21, section 177.2600 for wet food contact applications. Manufactured in Australia from certified materials to ensure quality and consistency.

 

Special note: Most comparable products on the market use 0.5mm thick adhesive backing, and feature cavities in underside the tile to save on material costs. Many comparable products on the market are made from inferior PVC/ TPU materials and non certified imported materials. Adhesive quality can also vary condiderably. Our tiles use the best of best materials, resulting in highest quality and performance reliability.

 

Pricing:

Note:Tactile indicators are GST exempt items.

Minimum order pack:

Pack of 8 X tiles (MOQ): $205.00 (includes delivery Australia Wide).

Volume pricing:

Note: Volume pricing does not include freight. Freight cost is generally around $0.50- $1.00/ tile (Australia wide destinations). Minimum freight charge is $22.00 + GST. Large volume orders may include delivery free of charge.

9-31 tiles: $20.00/ pce

32-49 tiles: $17.00/ pce

50-200 tiles:$16.00/ pce

201+ tiles: $15.00/ pce

 

Available for purchase via our tactile indicator tile online store. Enter Online Store.

Polyurethane integrated tactiles

Premium Grade Polyurethane Integrated TGSI tiles (mid/ light grey), with Step Keeper aluminium stair nosing (grey insert):

300mm X 300mm poly tactile tiles sticky back

high tech peel and stick tactile indicator tiles

 

ENDURA INTEGRATED TGSI PLATE:

Dimensions: 300 X 600mm X 6.5mm (1.8mm base), Custom sizes available.

Material: Solid 316L Stainless steel or Solid brass. Discrete units welded to base plate.

Colors: Stainless steel lustre, brass lustre, black surface finish.

Type: Hazard, directional.

Location: Interior and exterior

Suitable substrates: Concrete, asphalt, ceramics, stones, woods, carpet, plastics, steel, aluminium.

Installation: Install direct on existing substrate.

Slip resistance rating: R13, V

Luminous reflectance value (mean): Stainless steel: 23.53 (dry), 21.71 (wet), Black finish: 4.05 (dry), 3.45 (wet), Brass: 33.21 (dry), 26.32 (wet).

Notes: Solid 316 grade stainless steel, very durable, high class finish, quick installation. Install via direct adhesion, screw fix or combination of both.

Stainless steel integrated tactile ground surface indicator plate 300mm X 600mm, brass, stainless steel, black

black stainless steel tactile plate grating carpet tileEndura 316 stainless steel integrated warning TGSI plate 300mm X 600mm

black stainless steel tgsi plate

stainless-steel-tactile-plate-screw-down

Tactile indicator welded base plate

CARBORUNDUM INFILL INTEGRATED TGSI PLATE:

Dimensions: 300 X 600mm X 6.5mm (1.8mm base), Custom sizes available.

Material/ Color: Solid 316L Stainless steel/ solid brass with black carborundum infill. Discrete units welded to base plate.

Type: Hazard, directional.

Location: Interior and exterior

Suitable substrates: Concrete, asphalt, ceramics, stones, woods, carpet, plastics, steel, aluminium.

Installation: Install direct on existing substrate.

Slip resistance rating: P5

Luminous reflectance value (mean): 3.79 (dry), 3.39 (wet)

Note: Durable, decor/ contrast option.

tactile-indicator-plate-carborundum screw-down-tactile-indicator-plate-pad

 

CERAMIC TGSI TILES:

Dimensions: 300 X 300 X 10mm (10mm base). 5mm tactile projections.

Colors: Yellow, ivory, grey, charcoal.

Type: Hazard and directional

Location: Interior and exterior

Suitable substrates: Concrete, bitumen, pavers, ceramics, others

Slip resistance rating: W, R12

Luminous reflectance values (mean): Yellow: 32.57 (dry), 32.44 (wet), Ivory: 44.48 (dry), 42.61 (wet), Grey: 18.66 (dry), 17.38 (wet), Charcoal: 10.60 (dry), 8.31 (wet).

Physical properties: Breaking load: 2242N, Breaking strength: 2092N, Modulus of rupture: 31.39/mm^2.

Installation: Inset installation, provide 13-15mm set down, fix with regular tile adhesive, 2-3mm spacings between tiles (apply grout in spacings).

 

Porcelain tactile indicators

Porcelain TGSI tiles charcoal color, 300mm X 300mm

QUICK FIX STAINLESS STEEL INTEGRATED TGSI's (Mechanical fix):

Dimensions: 300mm X 300mm X 6.2mm (1.6mm base, 4.6mm high tactile projections).

Material: Solid 316L stainless steel (one piece construction)

Colors: Stainless steel lustre, black surface finish.

Type: Hazard, directional.

Location: Interior and exterior

Slip resistance rating: P4

Luminous reflectance values (mean): stainless steel lustre model: 47.47. Black surface finish model: 6.30

Suitable substrates: Concrete, asphalt, ceramics, stones, woods, carpet, plastics, steel, aluminium.

Installation: Install direct on existing substrate.

Notes: Useful for mechanical fix only applications. Highly durable and economical solution.

Stainless steel integrated tactile ground surface indicator plate 300mm X 600mm, brass, stainless steel, black

Image under natural light conditions

screw-fix-tactile-indicator-tile-stainless-steel-quick-fix

 

STANDARD GRADE POLYURETHANE, PRE- APPLIED ADHESIVE BACKING:

Dimensions: 300 X 300mm X 7.5mm (2.5mm base).

Material: UV stabilised TPU. 5 Year material guarantee.

Backing: Available with or with out adhesive backing.

Adhesive type: High quality pre- applied butyl rubber adhesive backing. Thickness 0.5mm. Siliconized release paper.

Colors: Terracotta, charcoal grey, beige, sunflower yellow, black, safety yellow.

Luminous reflectance values (Dry mean): Black: 3.42, Safety yellow: 38.91, Beige: 30.66, Charcoal Grey: 17.45, Sunflower Yellow: 66.75, Terracotta: 11.77

Type: Hazard and directional

Location: Both interior and exterior.

Suitable substrates: Concrete, ceramics, stones, woods, plastics, glass, steel.

Slip resistance rating: R12, V

Note: Color fast, abrasive resistant, economical. Manufactured in Australia.

MOQ: Colors: Yellow, Sunflower yellow: 8 X tiles. Colors: black: 160 X tiles. Colors: Beige, Charcoal, Terracotta: 80 X tiles.

Peel-and-stick-budget-tactile-tile-supplier-australia

 

 

SCREW FIX FIBREGLASS REINFORCED RESIN PLATE TGSI :

Dimensions: 300 X 600mm X 2.0mm (2.0mm base). 5mm tactile projections.

Colors: White, yellow, black

Type: Hazard and directional

Location: Most suited to exterior locations.

Material: UV stabilised resin with fibreglass reinforcement. Strong rigid construction. Easy handling.

Suitable substrates: Concrete.

Slip resistance rating: P5, R12 (hazard), R11 (directional). Not recommended for very high traffic areas, due to wear of engraved pattern on projections over time will reduce slip restance rating.

Luminance reflectance values: Yellow: 46.84 (wet), 46.84 (dry), White: 75.79 (wet), 75.79 (dry), Black: 3.26 (wet), 4.10 (dry).

Suitable substrates: Concrete. Not recommended on asphalt surfaces due to expansion and contraction of asphalt with temperature changes.

Fixing: Incorperates 6 X predrilled holes for screw fixing to substrate. Recommend combination screw/ adhesive fixation.

Note: Fast installation.

Fibreglass-TGSI-tiles

FRP-tactile-tile-plate Rigid-screw-down-tactile-indicator-tile

tactile-plate-tile-online-store

perth-tactile-indicator-supplier

GRANITE TGSI PAVERS:

Dimension: 300mm X 300mm X 35mm (35mm base). 5mm tactile projections.

Colors: Ivory

Type: Hazard and directional tactile pavers.

Location: Indoor, Outdoor

Slip Resistance: W, R13

Luminous reflectance values (mean): Ivory: 41.89 (dry), 32.65 (wet). Note: LRV may vary depending on batch.

Suitable substrate: Inset installation.

Notes: Solid natural granite tactile ground surface indicator pavers. Weight: 8.5Kg/ paver.

Granite tactile indicator

Granite Tactile indicator (TGSI) Pavers

 

HOME PAGE

DISCRETE TACTILE INDICATORS

INTEGRATED TACTILE INDICATORS

STAIR NOSING PRODUCTS

SKATEBOARD DETERRENTS

ANTI SLIP / NON SLIP TAPES

REFLECTIVE TAPES

PVC EMBOSSED TAPE (NON ABRASIVE)

DOUBLE SIDED TAPES

ENTRANCE MAT SYSTEMS

ALUMINIUM SKIRTING BOARD

GRP FLOOR GRATINGS

INSTALLATION IMAGES

ONLINE STORE

ONLINE STORE TERMS & CONDITIONS

CONTACT US/ DELIVERY ENQUIRIES

TGSI PTY LTD

ABN: 15 121 583 257

COPYRIGHT © 2021