TGSI-supplier

 

Tactile indicators australia, northern territory, western australia, queensland, tasmania

stair-nosing-supplier-brisbane-perth-sydney

Full range of discrete tactile ground surface indicators (TGSI's) compliant with AS/NZS 1428.4.1-2009/ BCA. TGSI's in our discrete range incorporate proven quality properties of high mechanical strength, lasting durability & aesthetic appeal. Buy direct from manufacturer/ stockist. Laboratory test results available on request. Slip resistance results are obtained in accordance with AS 4586:2013 (slip resistance classification of new pedestrian surface materials). LRV and slip resistance test reports available on request.

General installation information: 400 X discrete TGSI's will cover 1 SQM of area (eg. an area 1.2m X 0.6m will require 288 X units). Typically tactile indicators are set back 300mm from step or ramp, and installed 600mm deep (sometimes 300mm or 800mm, refer to AS for specific scenario applications), they should span the width of path of travel. Discrete TGSI's are installed with spacings 50mm apart centre to centre. We offer drilling templates to suit all TGSI's in our range, Use of drilling templates make installing TGSI's, a simple task, that generally does not require specialist tools (Note: a small diameter core drill is need to drill into hard ceramics) or skills. The process generally involves positioning template, drilling holes, vacuum out dust from holes, fixing in TGSI's in place.

DISCRETE TACTILE GROUND SURFACE INDICATOR RANGE:

ENDURA MARINE GRADE 316 STAINLESS STEEL:

Dimensions: 35mm diameter X 4.5mm height

Metal types: Solid marine grade 316L grade stainless steel. One piece forged construction. 10 year Guarantee.

Finish: Machine

Type: Hazard

Location: Exterior and interior use

Suitable substrates: Hard surfaces: Concrete, bitumen, ceramics, stones, woods, plastics, steel, vinyl, rubber, glass.

Underside: 12mm long X 6mm wide stem, 25mm long X 8mm wide stem, 4mm long stem, custom size stem, or flat underside.

Slip resistance rating: R13, W (P4). CSIRO test report available on request.

Luminous reflectance values (mean): 19.52 (dry), 17.69 (wet)

Fixing: See images below (text)

Note: Conforms to AS1428.4.1.2009 AS/NZ Standards.

Pricing:

12mm X 6mm stem model: From $0.85/ pce

Flat based model: From $0.75/ pce

(Note: tactile ground surface indicators are GST exempt items)

 

12mm long X 6mm wide stem (recommended for installation direct to hard solid material, eg. concrete, tile, stone, woods, hard vinyl etc). Use of single component adhesive/ sealant (eg. Bostik Seal N Flex FC) is generally used to fix this model to ground surface material, proving very strong (superior) long term fixation.

discrete hazard TGSI supplier

25mm long X 8mm wide stem (recommended for installation direct to bitumen/ asphalt.

Flat based stainless steel discrete TGSI, direct epoxy fix to hard flooring material (recommended for fixing to ceramic tiles/ hard stone/ terrazzo in interior locations only). Use high quality construction grade epoxy adhesive (eg. Megapoxy PM, apply an anount of approx 5c piece/ TGSI)

flat-based-epoxy-fix-discrete-hard-tactile-indicator-australia

Discrete warning TGSI

Endura_316_stainless-steel-tactiles-timber-decking

 

MULTI TAC:

Dimensions: 35mm diameter X 5.0mm height

Metal types: Solid 316 grade stainless steel, brass.

Finish: Electro polished, custom.

Location: Indoor, outdoor

Underside: Flat with hole in center (screw in fixation)

Slip resistance rating: R11, P5. CSIRO test report available on request.

Luminous reflectance values (mean): 15.58 (dry), 17.41 (wet).

Screw: Stainless steel, 8 gauge screw supplied with the product (for stainless steel model).

Note: Conforms to AS1428.4.1.2009 AS/NZ Standards. Rremovability option (re-use etc.). Supplied with screw.

Pricing:

From $1.00/ pce

(Note: tactile ground surface indicators are GST exempt items)

 

TGSI Tactile indicator. screw in application

Screw fix stainless steel tactile indicator stud

GRIT-TAC

Dimensions: 35mm diameter X 4.5mm height

Metal types: Solid 316 grade stainless steel with colored grit centre.

Centre infill: Heavy duty/ high durabilty bonded alumiunium oxide/ carborundum grain infill. Black or yellow color.

Finish: Machine

Type: Hazard

Sides: Ribbed, smooth

Location: Outdoor, indoor

Suitable substrates: Hard surfaces: Concrete, ceramics, stones, woods, plastics, steel, vinyl, rubber.

Underside: 12mm long X 6mm wide stem, or flat underside, custom stem (eg. 25mm long).

Slip resistance rating: P5. Test report available on request.

Luminous reflectance values (mean): Yellow infill: 27.33 (dry), 25.33 (wet),

Black infill: 3.79 (dry), 3.39 (wet)

Notes: Conforms to AS1428.4.1.2009 AS/NZ Standards. High durability.

Pricing:

From $1.00/ pce

(Note: tactile ground surface indicators are GST exempt items)

GRIT TAC DISCRETE STAINLESS STEEL TACTILE GROUND SURFACE INDICATORS

Stainless steel tactile with yellow insert

Grit tac stainless steel discrete tactile indicator with black carborundum insert

carborundum-tactile-discrete

 

ENDURA BL:

Dimensions: 35mm diameter X 4.5mm height

Metal types: Solid marine grade 316 grade stainless steel

Finish: Black surface treated finish.

Type: Hazard

Slip resistance rating: P5. Test report available on request.

Luminous reflectance values (mean): 3.21 (dry), 2.87 (wet)

Location: Suitable for both exterior and interior locations.

Suitable substrates: Hard surfaces: Concrete, ceramics, stones, woods, plastics, steel, vinyl, rubber, glass.

Underside: 12mm long X 6mm diameter stem, flat underside, custom stem.

Note: Conforms to AS1428.4.1.2009 AS/NZ Standards. High contrast stainless steel option.

Pricing:

From $1.25/ pce

(Note: tactile ground surface indicators are GST exempt items)

Black surface finish 316 stainless steel discrete TGSI's

black-discrete-tactile-indicator

POLYURETHANE HAZARD STEM BASED:

Dimensions: 35mm diameter X 5.0mm height

Material: High grade polyurethane. UV Stabilised.

Type: Hazard (stem based).

Location: Exterior, interior

Suitable substrates: Concrete, bitumen, carpet, ceramics, stones, wood.

Underside: 12mm (suits concrete and hard solid surfaces), 25mm stem (suits bitumen). Pressure fit stem fixation to suit 8mm diameter hole.

Slip resistance rating: V/R11

Luminious reflectance values (mean, dry): Black: 5, Yellow: 68, Terracotta: 12, Grey: 17, Blue: 9.4, Beige: 27, Brown: 13.24, Charcoal: 13.48, Cobalt: 16.4, Green: 5.0.

Colors: Terracotta, charcoal, yellow, black, beige, blue, silver, cobalt, green, brown.

Notes: Conforms to AS1428.4.1.2009 AS/NZ Standards. Australian made.

Pricing: From $0.30/ pce (GST exempt item)

pathfinder systems australia tactile supplier

bladed shaft and star shaft plastic tactile indicators

POLYURETHANE HAZARD BLADED SHAFT STRIP 600MM:

Dimensions: 12 X 35mm diameter X 5.0mm height discrete units joined together in 600mm long bladed shaft strip.

Material: High grade polyurethane. UV stabilised.

Type: Hazard (bladed shaft type).

Location: Exterior

Suitable substrates: Concrete, stone, bitumen (for bitumen use 15mm bladed shaft model). Fits 2.5mm width slot.

Underside: 10mm deep or 15mm deep bladed shaft.

Slip resistance rating: V/R11

Luminious reflectance values (mean, dry): Black: 5, Yellow: 68, Terracotta: 12, Grey: 17, Blue: 9.4, Beige: 27, Brown: 13.24, Charcoal: 13.48, Cobalt: 16.4, Green: 5.0.

Colors: Terracotta, charcoal, yellow, black, beige, blue, ivory, silver, green, brown.

Notes: Conforms to AS1428.4.1.2009 AS/NZ Standards. Australian made.

Pricing:

Special (yellow or blue color): $2.00/ pce (based on box of 100 X strips)

(Note: tactile ground surface indicators are GST exempt items)

pathfinder systems bladed shaft tactile strip hazard

 

POLYURETHANE DIRECTIONAL :

Dimensions: 35mm diameter X 5.0mm height X 285mm long

Material: High grade polyurethane. UV stabilised.

Type: Directional

Location: Exterior

Suitable substrates: Concrete,stone, bitumen (for bitumen use 15mm bladed shaft model). Fits 2.5mm width slot.

Slip resistance rating: V/R12

Underside: 10mm bladed shaft, 15mm bladed shaft.

Luminous reflectance values: see polyurethane hazard section above.

Colors:Terracotta, charcoal, yellow, black, beige, blue, ivory, silver, green, brown.

Notes: Conforms to AS1428.4.1.2009 AS/NZ Standards. Australian made.

Pricing:

From $2.80/ pce (Note: tactile ground surface indicators are GST exempt items)

POLYURETHANE DIRECTIONAL TACTILE GROUND SURFACE INDICATOR

ENDURA SOLID BRASS:

Dimensions: 35mm diameter X 4.5mm height

Metal type: Solid brass.

Finish: Machine finish

Type: Hazard

Sides: Smooth

Location: Outdoor, indoor

Suitable substrates: Hard surfaces: Concrete, bitumen, ceramics, stones, woods, plastics, rubber.

Underside: 11mm long X 6mm diameter stem, flat underside, or custom size.

Fixation: Fix with polyurethane or silicone based Adhesive Sealant (eg. Bostik Seal N Flex FC etc)

Slip resistance rating: R13, W

Luminous reflectance values (mean): 33.27 (dry), 26.18 (wet).

Note: Conforms to AS1428.4.1.2009 AS/NZ Standards

Pricing:

From $1.20/ pce

(Note: tactile ground surface indicators are GST exempt items)

brass and stainless TACTILE GROUND SURFACE INDICATOR

MULTI TAC MACH:

Dimensions: 35mm diameter X 4.5mm height

Metal types: Solid brass, copper, aluminium, stainless steel, polymer.

Finish: Machine.

Location: Indoor, outdoor

Suitable substrates: Effective on wood based substates (wood, carpet tile/ wood, vinyl/ wood etc.). Removability option.

Underside: Flat with hole in center (screw in fixation), also available with no hole in centre (flat based).

Luminous reflectance values (mean): Brass: 25.81 (dry), 22.70 (wet). Copper: 15.41 (dry), 19.23 (wet)

Notes: Conforms to AS1428.4.1.2009 AS/NZ Standards. Versatile. Good option for certain types of carpets, wood decking, and areas where removability is a desired option. High class finish. Australian Made.

brass and copper screw in tactile stud

DIR ST3 (Heavy duty directional TGSI):

Dimensions: 35mm diameter X 4.8mm height X 288mm long

Metal types: Solid 316 grade stainless steel.

Color: Stainless steel lustre or black surface finish.

Finish: Machine

Type: Directional

Location: Indoor and outdoor

Suitable substrates: Hard surfaces: Concrete, bitumen, ceramics, stones, woods, plastics, steel.

Underside: 3 X 15mm long heavy duty welded stems. Compatible drilling templates available for easy installation.

Slip resistance rating: P5. Test report available on request.

Luminous reflectance values (mean): stainless steel: 48.16 (dry), 48.01 (wet), black finish: 6.26 (dry), 5.78 (wet)

Notes: Conforms to AS1428.4.1.2009 AS/NZ Standards. Manufactured from solid stamping (not inferior casting).

316 grade stainless steel discrete directional TGSI strip black stainless steel directional tactile strip line blind visually impaired guidance direction

DIR ST3 stainless steel directrional hazard tactile ground surface indicator strips

GRIT-TAC BR

Dimensions: 35mm diameter X 4.5mm height

Metal types: DZR brass, with black grit centre.

Centre infill: Heavy duty/ high durabilty bonded carborundum grain infill. Black color.

Finish: Machine

Type: Hazard

Sides: Ribbed, smooth

Location: Outdoor, indoor

Suitable substrates: Hard surfaces: Concrete, ceramics, stones, woods, plastics, steel, vinyl, rubber.

Underside: 11mm-12mm stem, or flat underside

Luminous reflectance values (mean): Black centre: 4.46 (dry), 4.20 (wet)

Note: Conforms to AS1428.4.1.2009 AS/NZ Standards

solid brass tactile stud TGSI discrete Australian standard office fitout

 

g-

 

Installation information (flat based discrete tactiles, hard surfaces (ceramic/ stones):

(For fixing to ceramic tiles and hard stone flooring where drilling is not desired. Recommended for interior locations only).

It is recommended to conduct a test application (trial test area) to ensure compatibility, prior to undertaking mass installation.

1. Clean substrate thoroughly and allow to dry completely (use acetone when possible).

2. Position flat based laying template in required position.

3. Apply small amount of suitable high quality epoxy adhesive (approx. sixe of 10 cent piece) to substrate in centre of template holes.

4. Place flat based tactile on top of adhesive/ template hole/s and rotate tactile to get even adhesive coverage.

5. Remove/ lift template.

5. Allow 1-2 hours for adhesive to set (depending on type of adhesive used).

Note: The above installation information is general in nature and provided in good faith, based on our experience with tactile indicator installations. TGSI Pty Ltd does not take legal responsibility for the use of the above information by any persons or entities or 3rd parties.

Installation information (stem based discrete tactiles, hard surfaces):

It is recommended to conduct a test application (trial test area) to ensure compatibility, prior to undertaking mass installation.

1. Securing templates: Lay drilling templates in correct position. Drill a hole in the substrate via each corner of the drilling template. Secure each corner of template to the newly drilled holes with use of plastic nozzle or other suitable device.

2. Preventing templates from moving during drilling can also be reinforced by the weight the installers foot. Check for alignment of holes in drilling template with newly drilled holes in substrate during the drilling process.

3. Proceed with mass drilling, when using multiple templates, the templates can be moved after drilling is complete and re-aligned with the next secured template.

4. After drilling is complete, remove drilling templates, and vacuum out dust and debris from the newly drilling holes and surrounding surface. Wipe surface with clean rag and acetone if suitable.

5. Apply adhesive inside the holes and the surrounding surface of the hole in order to provide fixation for stem and the underside of the tactile indicator with the substrate.

6. Insert tactile studs into holes and apply and downward twisting force to the tactile indicator so that the bottom of the tactile indicator lays flush with substrate. (note: adhesive should be applied in correct amount to minimise overflow from sides of tactile indicators whilst providing enough adhesive to ensure durable strong bond.

Note: The above installation information is general in nature and provided in good faith, based on our experience with tactile indicator installations. TGSI Pty Ltd does not take legal responsibility for the use of the above information by any persons or entities, or 3rd parties.

Tactile ground surface indicator laying template

HEAVY DUTY CONSTRUCTION FOR LONG USAGE LIFE.

AVAILABLE FOR STEMMED, FLAT BASED, AND DIRECTIONAL TACTILE INDICATORS.

TACTILE GROUND SURFACE INDICATOR INSTALLATION TEMPLATES TO SUIT ALL PRODUCTS ACCROSS THE RANGE.

RANGE OF SUITABLE ADHESIVES AVAILABLE.

HOME PAGE

DISCRETE TACTILE INDICATORS

INTEGRATED TACTILE INDICATORS

STAIR NOSING PRODUCTS

SKATEBOARD DETERRENTS

ANTI SLIP / NON SLIP TAPES

REFLECTIVE TAPES

PVC EMBOSSED TAPE (NON ABRASIVE)

DOUBLE SIDED TAPES

ENTRANCE MAT SYSTEMS

ALUMINIUM SKIRTING BOARD

INSTALLATION IMAGES

CONTACT US/ DELIVERY ENQUIRIES

 

 

Diamond Core drill bits (wet core drilling, sintered type). Ideal for drilling into brittle ceramic tiles. Diameters: 5mm, 6mm, 7mm, 8mm. 10mm upper shank. 10pcs for $100.00 + GST.

small diameter diamond core drill bits

 

Heavy duty steel installation templates (300mm X 600mm):

• Pilot hole drilling (Multi Tac)

• Stemmed based drilling (models to suit 6mm and 8mm diameter stem)

• Flat based TGSI (eg. epoxy fix)

• Directional TGSI (general purpose)

• Directional stemmed based drilling (DIR-ST3).

Steel drilling templates for discrete tactile indicator installation

TGSI PTY LTD

ABN: 15 121 583 257

COPYRIGHT © 2023